Demonstration of long-term reliability of a 266-nm, continuous-wave, frequency-quadrupled solid-state laser using beta-BaB(2)O(4)

We report what we believe to be the first operation of more than 1000 h of a 266-nm (cw) frequency-quadrupled solid-state laser with a 100-mW output. We used beta-BaB(2)O(4)(BBO) crystal grown by the Czochralski method to double the green-light (532-nm) wavelength, using an external resonant cavity. The green light was generated with an intracavity frequency-doubled Nd:YVO(4)laser pumped by a 4-W laser diode. When the incident 532-nm power on the external resonant doubler was 500 mW, we generated 100 mW of cw 266-nm radiation with the BBO crystal. The degradation rate seems to be proportional to the strength of the UV optical electric field. We also obtained a relative intensity noise of -130dB/Hz at frequencies of 2 to 10 MHz for 266-nm laser light.     

Determination factor of <110> direction growth in microcrystalline silicon thin film deposition

We have proposed the mechanism of the <110> directional growth of microcrystalline silicon (μc-Si) thin films deposited by PECVD (plasma enhanced chemical vapor deposition) from SiH₄ and H₂ gas mixture, where dimeric radicals act a key role to form bridge nuclei for the ledge formation on the (110) facet. In order to look further into details of the mechanism, we investigated other important factors that influence the growth of μc-Si in <110> direction in terms of their impact on crystallinity with varying deposition temperature. The enhancement of surface diffusion length of radicals is inferred from the enlargement of the crystalline grain size accompanied with the increase of the deposition temperature. The growth in <110> direction is also promoted as the deposition temperature increases. Therefore, it is suggested that the surface diffusion length of radicals is another key factor that governs the crystalline growth in <110> direction. The growth mechanism of μc-Si thin films in <110> direction is discussed in terms of the relation between the surface diffusion length of monomeric radicals depending on the substrate surface temperature and the average space of bridges depending on the density of dimeric radicals on the growing surface.     

Recoil proton tagged knockout reaction for He

We report for the first time the discrimination of the core fragment knockout and valence nucleon knockout reaction mechanisms at medium energy range, by the use of the recoil proton tagging technique. Intense ⁸He beams at 82.3 MeV/u were supplied by the RIPS beam line at RIKEN, and impinged on both hydrogen and carbon targets. Recoil protons were detected in coincidence with the forward moving core fragments and neutrons. The core fragment knockout mechanism is identified through the polar angle correlation and checked by various kinematics relations. This mechanism may be used to extract the cluster structure information of unstable nuclei. On the other hand, with the selection of the tagged valence nucleon knockout mechanism, a narrower peak of ⁷He ground state is obtained. The extracted neutron spectroscopic factor Sn=0.512(18) is relatively smaller than the no-tagged one, and is in good agreement with the prediction of ab initio Green?s function Monte Carlo calculations.     

Oxygen-rich Ti1−xO2 pillar growth at a gold nanoparticle–TiO2 contact by O2 exposure

In-situ gas-injection transmission electron microscopy revealed that a pillar grew at the edge of the interface of a gold nanoparticle and a TiO₂ substrate during exposure to O₂ gas at 100 Pa. The pillar was found to have a titanium-deficient chemical composition of Ti_1 ? xO₂ (x > 0) by electron energy loss spectroscopy (EELS). The spectra showed a chemical shift of oxygen and titanium ions to have ionic states of Ti³⁺ and O^y? (y < 3/2). The formation of the Ti_1 ? xO₂ at the contact edge of gold–Ti_1 ? xO₂ interface is discussed from the perspective of an O₂ affinity, which plays an important role in CO oxidation process of supported gold particle.     

Signal quality improvement of holographic data storage using adaptive two-dimensional filter

Holographic data storage is being widely studied for the purpose of developing next-generation large optical memories. A prospective use of this type of memory is in building image archives in large-scale data centers. In particular, demand for energy conservation at data centers, and therefore for holographic data storage, is growing. In holographic data storage, interference between bits occurs owing to wave aberration in the optical system, shrinkage of the medium, and crosstalk noise from neighboring holograms during multiplex recording; as a result of the interference, the reproduced image deteriorates and the bit error rate (BER) increases. In this study, to reduce the BER in both off-axis-type recording and coaxial-type recording, a two-dimensional finite impulse response (FIR) filter is applied to a reproduced image that has been recorded by angle multiplex recording and shift multiplex recording. First, for the optimization of the FIR filter coefficients, the linear minimum mean square error (LMMSE) method is applied; this method optimizes the coefficients by reducing the BER. Furthermore, for evaluating the optimization performance of the LMMSE method, the optimization performance is compared with that of the real-coded genetic algorithm (RCGA), which has the capability to search a wide range of coefficients. The optimization by the LMMSE method has been found to be excellent for off-axis-type recording but not for coaxial-type recording. It is speculated that this is because of the brightness irregularity in the reproduced image, resulting from crosstalk. On the other hand, a marked reduction in the BER is observed using the RCGA, despite the brightness irregularity. In this study, the effectiveness of the LMMSE method for signals recorded by coaxial-type recording, in which large brightness irregularity is expected, is examined using automatic gain control (AGC). It is found that the application of AGC reduces the BER even in the case of coaxial-type recording.     

电场方式对毛细管电泳分离DNA的影响

以羟乙基纤维素为筛分介质, 在直流、方波脉冲、反向脉冲电场中对0.1～10.0 kbp范围的DNA样品进行分离, 改变脉冲电场调制深度, 探讨电场方式对毛细管电泳分离DNA的影响. 研究发现, 其它实验条件一定时: (1)直流电场下, 小片段DNA (<1.0 kbp)可以被有效分离, 大片段DNA (>1.0 kbp)迁移时几乎重叠在一起; (2)方波脉冲电场下, 增大调制深度可提高大片段DNA (>1.0 kbp)分离效果, 但降低了部分小片段DNA (0.6～1.0 kbp)的分离度; (3)反向脉冲电场下, 可以实现0.1～8.0 kbp范围内各个DNA片段的有效分离, 改变调制深度会影响样本DNA的分离时间. 并将反向脉冲电场应用于毛细管电泳分离λ-DNA的EcoT14 I/Bgl II限制性内切酶酶切片段. 结果表明, 反向脉冲毛细管电泳技术具有快速、准确、重复性高等特点, 可用于宽分子量范围DNA片段分离.     

A multiscale approach of nonlinear composites under finite deformation: Experimental characterization and numerical modeling

The present paper is devoted to the study of the mechanical behavior of an ethylene propylene diene monomer (EPDM) rubber reinforced by polypropylene (PP) particles, revealed as compressible. The hyperlastic behavior of this blend has been characterized under cyclic uni-axial tensile tests. The experimental results show a significant effect of the fraction of (PP) particles (5%, 10%, 25% and 30% by weight) on the macroscopic behavior of the composite. In order to model this behavior, we first develop and implement a micromechanically-based nonlinear model for hyperelastic composites. The approach is based on the second order homogenization method proposed by Ponte Castaneda and Tiberio (2000) and for which suitable energy densities are adopted for the matrix and the inclusions phases, both assumed as compressible. We then proceed to the model verification by comparison with Finite Element simulations on a unit cell. Finally, we propose an extension of the model in order to take into account damage due to voids growth phenomena. The comparison of the multiscale damage model predictions with the experimental data obtained on the EPDM/PP composite indicates a very good agreement.